Cap Inspector CI 120: Cap Inspection with Filling Level Check
The Linear Vision for fast Bottle inspection
The base inspector is used to inspect 5-gallon water containers for
foreign particles. A camera takes a photograph of the base of the bottle
where the foreign particles lie. The image is then processed by software
which evaluates if the bottle is clean or not. The LED panel helps to
establish a strong contrast so that the objects lying on the base can be
easily detected. The bottles shall have no handle since it would cover up
part of the base.
The base inspector operates as follows
By pressing the start button on the touch screen the (optional) gate
opens and the bottles pass through the machine and are grabbed by a
rubber belt which transports the bottles over the LED panel.
As soon as the bottle is underneath the camera,
a picture is taken and evaluated.If the
bottle has been evaluated to be faulty, then the bottle is rejected onto
an optional wheel conveyor.
An acoustic and optical alarm is set off according to the detected
fault(s) when the bottle is rejected.
Linear Base Inspection for high production Speed
Linear Base Inspection
Pictures Base inspection
Bottles without handle: 100% detection.
Bottles with handle: Not the whole bottom can be seen but 85% of it.
screw real picture
detection of objects Polypropylen bottle
bottle with handle