[ Home ] [ Contact ] [ Impressum ] English Deutsch Spanisch
INSPECTO Automation AG, Switzerland / Sniffers for 5 Gallon bottles,Visual Inspection, PET  Recycling Inspection

You are here: Sniffer > Canis 120
The Canis Sniffer and leak detector Family: Canis 120
Canis 120 inspector has one inspection head. The machine is available as:
-Contamination detector
-Leak detector
-Leak Detector combined with contamination detection

With a single head the machine is relatively fast for contamination detection.
For leak detection it is slower, because leak detection needs more time.
In combination for leak and contamination the production speed is even a bit slower.
Generally, it is a simple machine that doesn't need much maintenance.
Of course, it is a quality inspection machine that works best under clean conditions.
Sniffer
Canis 120-C Contamination
Contamination Detection 800 bottles per hour
Sniffer for 5 gallon water containers
Sniffer for quality insurance.
Electronic nose for low maintenance,
reasonable costs and efficiency

Canis 120 L Leak
Leak detection 600 bph

Canis 120 CL Contamination + Leak detection

Leak and contamination detection 600 bph
cani120CLH
Canis 120 canis120CLH-le Canis120cl-aircon
Detection: Contaminations such as
Gasoline, Diesel, Benzene, used Motor Oil,
Kerosene, Naphthalene
Solvents: Acetone, Toluene, Colour solvents
Ammonia NH3,
Soft drinks
Alcohol, fermented fruit juice

Sensitivity for gasoline : 10 micro liters
in a 20 liter bottle; 0,025% ammonia; 0,1% isopropanol, 5 mikroliter Toluol.

Ask for more information.
Contact infos

The Sniffer heads in the C-type machine are of a new type. The Canis 220 Machine with the C-Sensors has been tested and approved by Coca Cola®, and by Nestlé Waters Vittel PTC Water. The sensitivity for the tested contaminants is equivalent to other products and sufficient for the bottle inspection. The stability is better than with the common detectors. Two sensors per station double the already high operation safety. The first advantage is the low price of the sensor compared to UV or flash lamps used in other machines. The second advantage is that the sensors must not be cleaned; the sensors are replaced after 12 to 18 month. The absolute minimal maintenance saves money and the replacement of sensors is simple.



[ Top ] Copyright 2017 - INSPECTO Automation AG